0.374 (9.50) ?0.154 (3.90) barrel crimp ring 0.197 (5.00) 0.118 (3.00) recommended cable stripping dimensions 0.098 (2.50) rg-174 cable descripton material finish body socket insulaton nickel te?on gold te?on brass be cu washer ph bronze nickel gasket rubber si rubber crimp ring nickel brass 0.197 (5.00) 0.287 (7.30) ?0.102 (2.60) 0.650 (16.50) 0.331 (8.40) 0.287 (7.30) 1/4-36uns-2a threads ?0.260 (6.60) insulator te?on te?on cover nickel brass polyole?n heat shrink black side view braided shield ?0.138 (3.50) 0.787 (20.00) heat shrink insulator cover assembly instructions 1. strip coax as shown. put heat shrink, then crimp ring onto cable. 2. slide the coax into the body until the center conductor is centered in the fork. 3. push the shield over the barrel. 4. solder the center conductor into center of the fork. 5. slide the crimp ring over the shield and crimp with a 0.128? crimp die. 6. trim off any excess shield wire sticking out from the ring. 7. slip the heat shrink tube over the crimp ring until it is against the body and then heat shrink. 8. slip insulator into body. 9. push cover into the opening. notes: (unless otherwise specified) 1. all dimensions are in inches [mm]. 2. dimensions apply after finishing. 3. manufacture to be compliant with eu rohs directive. 4. safety break all sharp corners and edges .02 maximum. revisions rev description date appv b add heat shrink to drawing 28-jul-09 cj sheet 1 of 1 ldcfdcc_a scale: 2:1 a title: size dwg. no. rev do not scale drawing angles: 1 tolerances: .020 [0.50]-.200 [5.00]= .008 [0.20] .200 [5.00]-1.200 [30.00]= .016 [0.40] 1.20 [30.0]-4.75 [120.0]= .024 [0.60] 4.75 [120.0]-12.40 [315.0]= .040 [1.0] drawn: engr: dt: dt: material: finish: projection: warning : this drawing contains proprietary information that is the sole property of connector city, and shall be treated as such. no disclosure or reproduction of this document is permitted, in whole or in part, without the express written permission of connector city or its designated agents. 159 ort lane merlin, or 97532 b rp-sma male right angle cable end crimp for rg174 cable CONREVSMA012 cj 7/28/09
|